Blog

Industrial roots blower specifications

What is the flow rate of a root blower?
Roots blower basic performance
1.Flow rate: Roots blowers have a wide flow range, generally reaching more than 30,000 cubic meters/hour, and have the advantage of large flow rates.
2.Pressure: The pressure range of Roots blower is very large, generally reaching more than 1.0-2.5kgf/cm². If higher pressure is required, it can be achieved through multi-stage series connection.
3.Power: The power of Roots blower is also relatively low, generally below 30kW. At the same time, the efficiency of Roots blowers is relatively high, generally reaching more than 60%.

Roots blower uses

• ‌Roots blowers‌ are widely used in many industries and fields, mainly including:
• ‌Sewage treatment‌: In the sewage treatment industry, Roots blowers are widely used in aeration, stirring, mixing and other aspects to ensure the smooth progress of the sewage treatment process.
• ‌Pneumatic conveying system‌: Roots blowers are used to transport feed, lime powder, monosodium glutamate, soybean skin, silica and other powdery materials, as well as grain suction machines or crane suction vacuum pumps in grain transportation to ensure the effectiveness of materials transmission.
• ‌Aquaculture‌: In aquaculture, Roots blowers use micropore aeration technology to oxygenate water quality and improve breeding efficiency.They are important equipment in the aquaculture industry.
• ‌Coal chemical industry‌: In the coal chemical industry, Roots blowers are used in sewage treatment and different processes, playing an important role in improving production efficiency and product quality‌.
• ‌Dust removal industry‌: Roots blowers are also used in the dust removal industry, such as desulfurization, denitrification, dust removal, etc., to ensure the effective treatment of industrial flue gas and waste gas.
• ‌Grain processing, flour mills, food factories‌: used in transportation, drying, cooling, dust and other links to ensure the smooth progress of the food processing process‌.
• ‌Paint and Coating Industry‌: Used for ventilation, dust removal and waste gas treatment to ensure the safety and health of the working environment.
• ‌Mining, quarrying, and mineral processing industries‌: used in emissions, exhaust, gas transportation, drying and other links to ensure environmental control and safety during the development of mineral resources‌.
• ‌Pharmaceutical Industry‌: In the pharmaceutical industry, Roots blowers are used in pharmaceutical processing, chemical reactions and other aspects, such as laboratory ventilation equipment, to ensure the safety and efficiency of the pharmaceutical production process‌.

Roots blower distributors

• At present, Shandong Longgu Heavy Industry Machinery Co., Ltd.’s main products include LGSR three leaf Roots blower, LGSR-V Roots vacuum pump, LGSR-H high-pressure blower series, bipolar series high-pressure, gas pressurized explosion-proof, pneumatic conveying series fans, steam compressors, LGMJ dense series fans, rotary fans, centrifugal fans, etc.
• Our company’s products are widely used in industries such as sewage treatment, pneumatic conveying, vacuum packaging, grain processing, electricity, petrochemicals, cement, mining, and special gas pressurized conveying.
• We have close cooperative relationships with top domestic enterprises such as Sande Group, COFCO Group, and Shanshui Cement. Our company’s sales outlets and after-sales service centers are located throughout the country and exported to countries such as Malaysia, India, Kyrgyzstan, Nigeria, etc.

What is the construction and working of roots blower?

• Roots blower structure
• Roots blower consists of five parts: casing, wall board, impeller, oil tank and muffler.
• Casing: mainly plays the role of supporting (wall boards, impellers, mufflers) and fixing.
• casing
• Wall board: mainly used to connect the casing and impeller, support the rotation of the impeller, and provide end-face sealing.
• Impeller: It is the rotating part of the Roots blower, divided into two blades and three blades. However, due to the many advantages of three blades, such as smaller air pulsation, lower noise, and smoother operation than two blades, it has gradually replaced the two-blade Roots blower.
• impeller
• Oil tank: Mainly used to store lubricating oil used to lubricate gears and bearings.
• Oil tank
• Muffler: used to reduce the noise caused by air flow pulsation when the Roots blower enters and exits.

Root blower working principle

• The working principle of Roots blower can be simply summarized into the following steps:
• 1.Suction stage: When the rotor rotates, the volume of the chamber gradually increases, forming a low-pressure area.This low-pressure area attracts outside air into the chamber.
• 2.Compression stage: As the rotor continues to rotate, the volume of the chamber gradually decreases.This process causes the air to become compressed, increasing its pressure.
• 3.Exhaust stage: When the volume of the chamber reaches the minimum value, the compressed air will be discharged from the chamber.At this time, the rotation of the rotor will increase the volume of the chamber again to prepare for the next round of suction.
• By repeating the above steps, the Roots blower can continuously suck in, compress and discharge air.This working principle enables Roots blowers to produce high-pressure, high-flow airflow.

Roots blower specifications contact us

Roots blower fan uses
roots blower fan‌ are widely used in many industries and fields, mainly including:

• ‌Sewage treatment‌: In the sewage treatment industry, Roots blowers are widely used in aeration, stirring, mixing and other aspects to ensure the smooth progress of the sewage treatment process.
• ‌Pneumatic conveying system‌: Roots blowers are used to transport feed, lime powder, monosodium glutamate, soybean skin, silica and other powdery materials, as well as grain suction machines or crane suction vacuum pumps in grain transportation to ensure the effectiveness of materials transmission.
• ‌Aquaculture‌: In aquaculture, Roots blowers use micropore aeration technology to oxygenate water quality and improve breeding efficiency.They are important equipment in the aquaculture industry.
• ‌Coal chemical industry‌: In the coal chemical industry, Roots blowers are used in sewage treatment and different processes, playing an important role in improving production efficiency and product quality‌.
• ‌Dust removal industry‌: Roots blowers are also used in the dust removal industry, such as desulfurization, denitrification, dust removal, etc., to ensure the effective treatment of industrial flue gas and waste gas.
• ‌Grain processing, flour mills, food factories‌: used in transportation, drying, cooling, dust and other links to ensure the smooth progress of the food processing process‌.
• ‌Paint and Coating Industry‌: Used for ventilation, dust removal and waste gas treatment to ensure the safety and health of the working environment.
• ‌Mining, quarrying, and mineral processing industries‌: used in emissions, exhaust, gas transportation, drying and other links to ensure environmental control and safety during the development of mineral resources‌.
• ‌Pharmaceutical Industry‌: In the pharmaceutical industry, Roots blowers are used in pharmaceutical processing, chemical reactions and other aspects, such as laboratory ventilation equipment, to ensure the safety and efficiency of the pharmaceutical production process‌.

Roots blower fan specifications

Roots blower fan pressure range

• According to different usage requirements, the pressure of the roots blower fan can be adjusted between 9.8kpa and 200kpa.Within this pressure range, the roots blower fan can work normally and meet various process requirements.Specifically, the pressure range of roots blower fan includes:
• ‌Low pressure range‌: The pressure is lower than 58.8kpa, including 9.8kpa to 58.8kpa.This type of fan usually uses air cooling, and is mostly designed with a single oil tank.
• ‌Medium pressure range‌: The pressure is between 58.8kpa and 98kpa.This type of fan requires water cooling, and most of them are designed with double oil tanks.
• ‌High pressure range‌: When the pressure exceeds 98kpa, especially when it exceeds 140kpa, double-stage pressure boosting technology is required to ensure stable operation of the fan under high pressure.

What is the difference between a blower fan and a regular fan?

• The difference between blower and fan
• Blowers and fans are similar in appearance, but the way they generate wind is different. A blower drives an impeller to generate airflow through the rotation of a motor, while a fan blows air through the rotation of blades.
• Applicable scenarios for blowers and fans
• The air volume of the blower is large, but the noise is also large. It is suitable for scenes that require large air volume, such as factories, ships, and other large space scenes, but it is not suitable for home use. Fans are lighter and less noisy, and are suitable for use in small-area scenarios such as homes and offices.
• Advantages and disadvantages of blowers and fans
• The advantages and disadvantages of the two are relatively obvious. Although the blower has a large air volume, it is noisy and large in size, making it inconvenient to carry. The fan is small and portable, but the air volume is relatively small, making it suitable for use in a comfortable environment. In actual use, the choice should be based on actual needs.

Root blowers is a positive displacement blower. Its working principle is based on the relative movement of two blade-shaped rotors in the cylinder to compress and transport gas.
This kind of fan has a simple structure and is easy to manufacture. It is suitable for gas transportation and pressurization systems in low-pressure situations, and can also be used as a vacuum pump.
The design and structure of the Roots blower ensure that it can effectively increase the pressure and flow of gas, and at the same time achieve precise control of gas flow and pressure by adjusting the rotation speed and angle of the impeller.
This type of pump is popular for its unique operating mechanism and wide range of applications, especially where stable air flow and pressure are required.

Root blowers uses

• ‌Root blowers‌ are widely used in many industries and fields, mainly including:
• ‌Sewage treatment‌: In the sewage treatment industry, Roots blowers are widely used in aeration, stirring, mixing and other aspects to ensure the smooth progress of the sewage treatment process.
• ‌Pneumatic conveying system‌: Root blowers are used to transport feed, lime powder, monosodium glutamate, soybean skin, silica and other powdery materials, as well as grain suction machines or crane suction vacuum pumps in grain transportation to ensure the effectiveness of materials transmission.
• ‌Aquaculture‌: In aquaculture, Root blowers use micropore aeration technology to oxygenate water quality and improve breeding efficiency.They are important equipment in the aquaculture industry.
• ‌Coal chemical industry‌: In the coal chemical industry, Roots blowers are used in sewage treatment and different processes, playing an important role in improving production efficiency and product quality‌.
• ‌Dust removal industry‌: Root blowers are also used in the dust removal industry, such as desulfurization, denitrification, dust removal, etc., to ensure the effective treatment of industrial flue gas and waste gas.
• ‌Grain processing, flour mills, food factories‌: used in transportation, drying, cooling, dust and other links to ensure the smooth progress of the food processing process‌.
• ‌Paint and Coating Industry‌: Used for ventilation, dust removal and waste gas treatment to ensure the safety and health of the working environment.
• ‌Mining, quarrying, and mineral processing industries‌: used in emissions, exhaust, gas transportation, drying and other links to ensure environmental control and safety during the development of mineral resources‌.
• ‌Pharmaceutical Industry‌: In the pharmaceutical industry, Root blowers are used in pharmaceutical processing, chemical reactions and other aspects, such as laboratory ventilation equipment, to ensure the safety and efficiency of the pharmaceutical production process‌.

Root blower working principle

• The working principle of Root blowers can be simply summarized into the following steps:
• Suction stage: When the rotor rotates, the volume of the chamber gradually increases, forming a low-pressure area.This low-pressure area attracts outside air into the chamber.
• Compression stage: As the rotor continues to rotate, the volume of the chamber gradually decreases.This process causes the air to become compressed, increasing its pressure.
• Exhaust stage: When the volume of the chamber reaches the minimum value, the compressed air will be discharged from the chamber.At this time, the rotation of the rotor will increase the volume of the chamber again to prepare for the next round of suction.
• By repeating the above steps, the Roots blower can continuously suck in, compress and discharge air.This working principle enables Roots blowers to produce high-pressure, high-flow airflow.

Root blower specifications

lgsr100

lgsr125

Root blowers pressure range

• According to different usage requirements, the pressure of the Root blowers can be adjusted between 9.8kpa and 200kpa.Within this pressure range, the Roots blower can work normally and meet various process requirements.Specifically, the pressure range of Roots blowers includes:
• ‌Low pressure range‌: The pressure is lower than 58.8kpa, including 9.8kpa to 58.8kpa.This type of fan usually uses air cooling, and is mostly designed with a single oil tank.
• ‌Medium pressure range‌: The pressure is between 58.8kpa and 98kpa.This type of fan requires water cooling, and most of them are designed with double oil tanks.
• ‌High pressure range‌: When the pressure exceeds 98kpa, especially when it exceeds 140kpa, double-stage pressure boosting technology is required to ensure stable operation of the fan under high pressure.

Roots blower pump pressure range

• According to different usage requirements, the pressure of the Roots blower can be adjusted between 9.8kpa and 200kpa.Within this pressure range, the Roots blower can work normally and meet various process requirements.Specifically, the pressure range of Roots blowers includes:
• ‌Low pressure range‌: The pressure is lower than 58.8kpa, including 9.8kpa to 58.8kpa.This type of fan usually uses air cooling, and is mostly designed with a single oil tank.
• ‌Medium pressure range‌: The pressure is between 58.8kpa and 98kpa.This type of fan requires water cooling, and most of them are designed with double oil tanks.
• ‌High pressure range‌: When the pressure exceeds 98kpa, especially when it exceeds 140kpa, double-stage pressure boosting technology is required to ensure stable operation of the fan under high pressure.

How does a roots blower pump work?

• The working principle of Roots blower can be simply summarized into the following steps:
• 1.Suction stage: When the rotor rotates, the volume of the chamber gradually increases, forming a low-pressure area.This low-pressure area attracts outside air into the chamber.
• 2.Compression stage: As the rotor continues to rotate, the volume of the chamber gradually decreases.This process causes the air to become compressed, increasing its pressure.
• 3.Exhaust stage: When the volume of the chamber reaches the minimum value, the compressed air will be discharged from the chamber.At this time, the rotation of the rotor will increase the volume of the chamber again to prepare for the next round of suction.
• By repeating the above steps, the Roots blower can continuously suck in, compress and discharge air.This working principle enables Roots blowers to produce high-pressure, high-flow airflow.

Roots blower uses

• Roots blower pumps‌ are widely used in many industries and fields, mainly including:
• ‌Sewage treatment‌: In the sewage treatment industry, Roots blowers are widely used in aeration, stirring, mixing and other aspects to ensure the smooth progress of the sewage treatment process.
• ‌Pneumatic conveying system‌: Roots blowers are used to transport feed, lime powder, monosodium glutamate, soybean skin, silica and other powdery materials, as well as grain suction machines or crane suction vacuum pumps in grain transportation to ensure the effectiveness of materials transmission.
• ‌Aquaculture‌: In aquaculture, Roots blowers use micropore aeration technology to oxygenate water quality and improve breeding efficiency.They are important equipment in the aquaculture industry.
• ‌Coal chemical industry‌: In the coal chemical industry, Roots blowers are used in sewage treatment and different processes, playing an important role in improving production efficiency and product quality‌.
• ‌Dust removal industry‌: Roots blowers are also used in the dust removal industry, such as desulfurization, denitrification, dust removal, etc., to ensure the effective treatment of industrial flue gas and waste gas.
• ‌Grain processing, flour mills, food factories‌: used in transportation, drying, cooling, dust and other links to ensure the smooth progress of the food processing process‌.
• ‌Paint and Coating Industry‌: Used for ventilation, dust removal and waste gas treatment to ensure the safety and health of the working environment.
• ‌Mining, quarrying, and mineral processing industries‌: used in emissions, exhaust, gas transportation, drying and other links to ensure environmental control and safety during the development of mineral resources‌.
• ‌Pharmaceutical Industry‌: In the pharmaceutical industry, Roots blowers are used in pharmaceutical processing, chemical reactions and other aspects, such as laboratory ventilation equipment, to ensure the safety and efficiency of the pharmaceutical production process‌.

Roots blower specifications

lgsr100

lgsr125

What is the benefit of a root blower vacuum pump?

The advantages of Roots blower include simple structure, high efficiency, high stability, wide application range, no lubrication, no oil pollution of gas, volumetric operation, small mechanical friction, long service life, etc.
The main advantages of Roots blowers can be summarized as follows:

• Simple structure‌: The structure of the Roots blower is relatively simple, including the main components such as the head, motor, and base, which makes its manufacturing and maintenance relatively easy.
• ‌High efficiency‌: Roots blower has high transmission efficiency and low energy consumption, and can compress and transport gas efficiently.
• High stability‌: Due to its simple structure and good design, the Roots blower has small vibration and low noise during operation, and has high stability.
• ‌Wide range of applications‌: Roots blowers are suitable for a variety of gas transportation scenarios, including compressed air, coal gas, oxygen, hydrogen, etc., and are widely used in petrochemical, building materials, electric power, smelting, fertilizer and other industries.
• ‌No lubrication, no oil pollution in gas‌: The impeller of Roots blower has no friction when running in the body, so no lubrication is needed, and the discharged gas is clean and does not contain oil pollution.
• Volume operation, wide pressure range‌: Roots blower is a volume operation type. As the pressure changes, the flow rate changes very little, but the flow rate can be adjusted by changing the rotation speed to adapt to different needs.
• ‌Small mechanical friction and long service life‌: Due to the design of the Roots blower, the mechanical friction loss is very small, and the contact between the bearing and the gear pair reduces wear, making it long service life.
• ‌Balance verification, stable operation‌: The rotor of the Roots blower has been statically and dynamically balanced to ensure that it is very stable and has little vibration during operation.

What is the difference between Roots blower and vacuum pump?

• The main difference between Roots blowers and Roots vacuum pumps is that although their uses and working principles are similar, the specific application scenarios and exhaust methods are different. ‌
• ‌Different purposes‌: Roots blower is usually used to transport low-pressure gas and gas boosting, and is a kind of wind conveying mechanical equipment; Roots vacuum pump is used to transport gas to high vacuum, and is a kind of vacuum pump.
• Working principle‌: The working principles of the two are basically the same. They both pass through two intermeshing impellers. After the inhaled gas is compressed and transmitted by the impellers, the pressure increases, and then it is discharged from the air outlet. Specifically, the Roots blower increases the pressure of the gas through the compression and transmission of the impeller, and then discharges it from the air outlet; while the Roots vacuum pump uses the operation of the impeller to cause the gas to flow into the cavity from the air inlet and undergo multiple compressions. Finally, it is discharged to achieve the purpose of increasing the vacuum degree.
• ‌Exhaust method‌: Roots blower discharges gas directly through the air outlet; Roots vacuum pump needs to discharge gas through other forms of diffusers, molecular pumps, etc.
• In general, Roots vacuum pump is a device used for vacuum conveying and vacuum degree improvement, while Roots blower is a device used to convey low-pressure gas and pressurized gas. The basic principles of the two are the same, but in specific applications and There is a difference in the exhaust method.

How does a Roots vacuum pump work?

• roots vacuum pump working principle
• The working principle of Roots blower can be simply summarized into the following steps:
• 1.Suction stage: When the rotor rotates, the volume of the chamber gradually increases, forming a low-pressure area.This low-pressure area attracts outside air into the chamber.
• 2.Compression stage: As the rotor continues to rotate, the volume of the chamber gradually decreases.This process causes the air to become compressed, increasing its pressure.
• 3.Exhaust stage: When the volume of the chamber reaches the minimum value, the compressed air will be discharged from the chamber.At this time, the rotation of the rotor will increase the volume of the chamber again to prepare for the next round of suction.
• By repeating the above steps, the Roots blower can continuously suck in, compress and discharge air.This working principle enables Roots blowers to produce high-pressure, high-flow airflow.

Roots vacuum pump working principle
The working principle of Roots blower can be simply summarized into the following steps:

• Suction stage: When the rotor rotates, the volume of the chamber gradually increases, forming a low-pressure area.This low-pressure area attracts outside air into the chamber.
• Compression stage: As the rotor continues to rotate, the volume of the chamber gradually decreases.This process causes the air to become compressed, increasing its pressure.
• Exhaust stage: When the volume of the chamber reaches the minimum value, the compressed air will be discharged from the chamber.At this time, the rotation of the rotor will increase the volume of the chamber again to prepare for the next round of suction.
• By repeating the above steps, the Roots blower can continuously suck in, compress and discharge air.This working principle enables Roots blowers to produce high-pressure, high-flow airflow.

What is a root vacuum pump?
‌The Roots vacuum pump is a rotary positive displacement vacuum pump whose structure is evolved from the Roots blower. ‌It first appeared in Germany in 1944, mainly for use as a mechanical booster pump in vacuum melting systems with large pumping speeds in the pressure range of 10 to 1000Pa. According to the different working pressure range of Roots vacuum pump, it can be divided into low vacuum Roots pump with direct discharge to the atmosphere, medium vacuum Roots pump (mechanical booster pump) and high vacuum multi-stage Roots pump.

The working principle of the Roots vacuum pump is based on two blade-shaped rotors that rotate synchronously in opposite directions. There are small gaps between the rotors and between the rotors and the inner wall of the pump casing without contact with each other, forming a variable volume vacuum pump. This design makes Roots vacuum pumps have the characteristics of fast startup, low power consumption, and low operation and maintenance costs. Therefore, it has been tested for long-term operation in petroleum, chemical industry, plastics, pesticides, steam turbine rotor dynamic balancing, aerospace space simulation and other devices. , and are widely used in petroleum, chemical industry, metallurgy, textile and other industrial fields. In addition, Roots vacuum pump is also used for noise control of vacuum pumps. As an important vacuum equipment, it is widely used in various industrial fields and has become an ideal choice for handling large amounts of gas and low vacuum requirements.

What is the difference between Roots blower and vacuum pump?

• The main difference between Roots blowers and Roots vacuum pumps is that although their uses and working principles are similar, the specific application scenarios and exhaust methods are different. ‌
• ‌Different purposes‌: Roots blower is usually used to transport low-pressure gas and gas boosting, and is a kind of wind conveying mechanical equipment; Roots vacuum pump is used to transport gas to high vacuum, and is a kind of vacuum pump.
• Working principle‌: The working principles of the two are basically the same. They both pass through two intermeshing impellers. After the inhaled gas is compressed and transmitted by the impellers, the pressure increases, and then it is discharged from the air outlet. Specifically, the Roots blower increases the pressure of the gas through the compression and transmission of the impeller, and then discharges it from the air outlet; while the Roots vacuum pump uses the operation of the impeller to cause the gas to flow into the cavity from the air inlet and undergo multiple compressions. Finally, it is discharged to achieve the purpose of increasing the vacuum degree.
• ‌Exhaust method‌: Roots blower discharges gas directly through the air outlet; Roots vacuum pump needs to discharge gas through other forms of diffusers, molecular pumps, etc.
• In general, Roots vacuum pump is a device used for vacuum conveying and vacuum degree improvement, while Roots blower is a device used to convey low-pressure gas and pressurized gas. The basic principles of the two are the same, but in specific applications and There is a difference in the exhaust method.

What is the range of roots pump?

• The working range of Roots pump is 1×10^3~1 Pa. ‌
• Roots pump is a rotary variable volume vacuum pump, which evolved from Roots blower. It has the ability to provide a large pumping speed in a wide pressure range, and is especially suitable for use as a mechanical booster pump in vacuum melting systems within a pressure range of 10~1000 Pa. According to different working ranges, Roots pumps are divided into low vacuum Roots pumps that discharge directly to the atmosphere, medium vacuum Roots pumps (also known as mechanical booster pumps) and high vacuum multi-stage Roots pumps.
• The working principle of the Roots pump is based on the rotational motion of the rotor. By maintaining a certain gap between the rotors and between the rotor and the inner wall of the pump casing, high-speed operation is achieved, so that it can operate within a wide pressure range (1×10^3~1 Pa) has a large pumping speed. In addition, the Roots pump also has the characteristics of quick start, insensitivity to dust and water vapor contained in the pumped gas, no need for lubrication of the rotor, no oil in the pump chamber, small vibration, good dynamic balance conditions of the rotor, no exhaust valve, and high driving power. It has the characteristics of small size, small mechanical friction loss, compact structure, small floor space and low operation and maintenance costs.

roots pump working principle
The working principle of Roots blower can be simply summarized into the following steps:

• Suction stage: When the rotor rotates, the volume of the chamber gradually increases, forming a low-pressure area.This low-pressure area attracts outside air into the chamber.
• Compression stage: As the rotor continues to rotate, the volume of the chamber gradually decreases.This process causes the air to become compressed, increasing its pressure.
• Exhaust stage: When the volume of the chamber reaches the minimum value, the compressed air will be discharged from the chamber.At this time, the rotation of the rotor will increase the volume of the chamber again to prepare for the next round of suction.
• By repeating the above steps, the Roots blower can continuously suck in, compress and discharge air.This working principle enables Roots blowers to produce high-pressure, high-flow airflow.

roots blower uses

• In the environmental protection industry, it is used in aerobic tank aeration, sedimentation tank mixing, ozone generator (used as a gas source for high-concentration ozone generators), garbage collection, vacuum cleaner trucks, and wet flue gas desulfurization in sewage treatment. wait. Sewage treatment is mainly used for purification and sediment mixing in water treatment plants. Desulfurization and oxidation is the process of transporting air to the desulfurization tower to accelerate the oxidation of ammonium sulfite into ammonium sulfate. Sewage treatment and flue gas desulfurization are generally done by environmental protection projects and environmental equipment companies responsible for desulfurization, denitrification and sewage treatment.
• In the aquaculture industry, it is used to provide oxygen in the water of fish ponds for various fish and crabs, and is also used in aquariums and live fish tanks. (Various large-scale farming of Penaeus vannamei, sea cucumbers, fish, etc.)
• In the pneumatic conveying industry, it is used for grain conveying and dilute phase conveying of powder and granular materials. The fan is used as a low-pressure air source in the form of gas conveying to transport wheat, calcium powder, fly ash, coal dropped from the unloader. Powder, baking soda, cement, flour, bauxite, alkali powder, ammonium phosphate, potassium chloride and other materials. Granular and powdery raw materials such as polyethylene, polypropylene, PE, PP, and urea are transported to the terminal receiving bin. (Inhalation type can also be used). Central feeding system used in injection molding, blister molding, and rotational molding industries to transport raw materials to different equipment. Used in vacuum feeding system and used as negative pressure suction.
• In the mining and metallurgical industries, it is used for coal preparation and flotation by jigging method and air dense medium method. Underground gas extraction, boiling furnace air supply, iron ore particle transportation, ironmaking furnace air supply, metallurgical furnace slag suction, coal washing machine, flotation machine supporting, etc.
• In the building materials industry, it provides blasting for cement vertical kilns, feeds coal to cement rotary kilns, homogenizes cement raw materials, homogenizes raw materials with coal and homogenizes cement. Atomization of fuel in ceramic kilns, magnesia kilns and glass tank furnaces, adsorption of flat glass, molding of glass products and light bulbs, and dehydration of calcium weight plates.

Roots blower pressure range

According to different usage requirements, the pressure of the Roots blower can be adjusted between 9.8kpa and 200kpa.Within this pressure range, the Roots blower can work normally and meet various process requirements.Specifically, the pressure range of Roots blowers includes:

• ‌Low pressure range‌: The pressure is lower than 58.8kpa, including 9.8kpa to 58.8kpa.This type of fan usually uses air cooling, and is mostly designed with a single oil tank.
• Medium pressure range‌: The pressure is between 58.8kpa and 98kpa.This type of fan requires water cooling, and most of them are designed with double oil tanks.
• ‌High pressure range‌: When the pressure exceeds 98kpa, especially when it exceeds 140kpa, double-stage pressure boosting technology is required to ensure stable operation of the fan under high pressure.

What is the benefit of a Roots blower?
The advantages of Roots blower include simple structure, high efficiency, high stability, wide application range, no lubrication, no oil pollution of gas, volumetric operation, small mechanical friction, long service life, etc.
The main advantages of Roots blowers can be summarized as follows:

• ‌Simple structure‌: The structure of the Roots blower is relatively simple, including the main components such as the head, motor, and base, which makes its manufacturing and maintenance relatively easy.
• ‌High efficiency‌: Roots blower has high transmission efficiency and low energy consumption, and can compress and transport gas efficiently.
• High stability‌: Due to its simple structure and good design, the Roots blower has small vibration and low noise during operation, and has high stability.
• ‌Wide range of applications‌: Roots blowers are suitable for a variety of gas transportation scenarios, including compressed air, coal gas, oxygen, hydrogen, etc., and are widely used in petrochemical, building materials, electric power, smelting, fertilizer and other industries.
• ‌No lubrication, no oil pollution in gas‌: The impeller of Roots blower has no friction when running in the body, so no lubrication is needed, and the discharged gas is clean and does not contain oil pollution.
• Volume operation, wide pressure range‌: Roots blower is a volume operation type. As the pressure changes, the flow rate changes very little, but the flow rate can be adjusted by changing the rotation speed to adapt to different needs.
• ‌Small mechanical friction and long service life‌: Due to the design of the Roots blower, the mechanical friction loss is very small, and the contact between the bearing and the gear pair reduces wear, making it long service life.
• ‌Balance verification, stable operation‌: The rotor of the Roots blower has been statically and dynamically balanced to ensure that it is very stable and has little vibration during operation.

How does a Roots style blower work?
The working principle of Roots blower can be simply summarized into the following steps:

• Suction stage: When the rotor rotates, the volume of the chamber gradually increases, forming a low-pressure area.This low-pressure area attracts outside air into the chamber.
• Compression stage: As the rotor continues to rotate, the volume of the chamber gradually decreases.This process causes the air to become compressed, increasing its pressure.
• Exhaust stage: When the volume of the chamber reaches the minimum value, the compressed air will be discharged from the chamber.At this time, the rotation of the rotor will increase the volume of the chamber again to prepare for the next round of suction.

What type of pump is a Roots blower?
‌Roots blower is a positive displacement pump. ‌
Roots blower, also known as Roots blower, is a positive displacement blower. Its working principle is based on the relative movement of two blade-shaped rotors in the cylinder to compress and transport gas.
This kind of fan has a simple structure and is easy to manufacture. It is suitable for gas transportation and pressurization systems in low-pressure situations, and can also be used as a vacuum pump.
The design and structure of the Roots blower ensure that it can effectively increase the pressure and flow of gas, and at the same time achieve precise control of gas flow and pressure by adjusting the rotation speed and angle of the impeller.
This type of pump is popular for its unique operating mechanism and wide range of applications, especially where stable air flow and pressure are required.

Roots blower specifications

lgsr65

lgsr100

Roots Blower Manufacturers

Shandong Longgu Heavy Industry Machinery Co., Ltd. (formerly known as Zhangqiu Taiping Machinery Factory) is located in Chengdong Industrial Park, Zhangqiu City, Shandong Province, which has the reputation of being a national garden city and a national health city. It is half an hour away from Jinan International Airport, with a superior geographical location and convenient transportation.

Roots Blower Manufacturers
Since its establishment in the early 1990s, Longgu Heavy Industry has become a diversified machinery enterprise integrating fan and pneumatic conveying equipment system engineering. Our company has advanced computer-aided design and manufacturing, CNC machining technology, and adopts information technologies such as computer-aided design and CAPPCT to improve product design and manufacturing accuracy and shorten the design and manufacturing cycle.

• Air suspension centrifugal blower
• Powder pneumatic conveying equipment
• High voltage pulse dust collector
• Rotary feeder
• Roots rotary lobe blower manual

roots blower uses

• In the environmental protection industry, it is used in aerobic tank aeration, sedimentation tank mixing, ozone generator (used as a gas source for high-concentration ozone generators), garbage collection, vacuum cleaner trucks, and wet flue gas desulfurization in sewage treatment. wait. Sewage treatment is mainly used for purification and sediment mixing in water treatment plants. Desulfurization and oxidation is the process of transporting air to the desulfurization tower to accelerate the oxidation of ammonium sulfite into ammonium sulfate. Sewage treatment and flue gas desulfurization are generally done by environmental protection projects and environmental equipment companies responsible for desulfurization, denitrification and sewage treatment.
• In the aquaculture industry, it is used to provide oxygen in the water of fish ponds for various fish and crabs, and is also used in aquariums and live fish tanks. (Various large-scale farming of Penaeus vannamei, sea cucumbers, fish, etc.)
• In the pneumatic conveying industry, it is used for grain conveying and dilute phase conveying of powder and granular materials. The fan is used as a low-pressure air source in the form of gas conveying to transport wheat, calcium powder, fly ash, coal dropped from the unloader. Powder, baking soda, cement, flour, bauxite, alkali powder, ammonium phosphate, potassium chloride and other materials. Granular and powdery raw materials such as polyethylene, polypropylene, PE, PP, and urea are transported to the terminal receiving bin. (Inhalation type can also be used). Central feeding system used in injection molding, blister molding, and rotational molding industries to transport raw materials to different equipment. Used in vacuum feeding system and used as negative pressure suction.
• In the mining and metallurgical industries, it is used for coal preparation and flotation by jigging method and air dense medium method. Underground gas extraction, boiling furnace air supply, iron ore particle transportation, ironmaking furnace air supply, metallurgical furnace slag suction, coal washing machine, flotation machine supporting, etc.
• In the building materials industry, it provides blasting for cement vertical kilns, feeds coal to cement rotary kilns, homogenizes cement raw materials, homogenizes raw materials with coal and homogenizes cement. Atomization of fuel in ceramic kilns, magnesia kilns and glass tank furnaces, adsorption of flat glass, molding of glass products and light bulbs, and dehydration of calcium weight plates.

Roots blower pressure range

• According to different usage requirements, the pressure of the Roots blower can be adjusted between 9.8kpa and 200kpa.Within this pressure range, the Roots blower can work normally and meet various process requirements.Specifically, the pressure range of Roots blowers includes:
• ‌Low pressure range‌: The pressure is lower than 58.8kpa, including 9.8kpa to 58.8kpa.This type of fan usually uses air cooling, and is mostly designed with a single oil tank.
• ‌Medium pressure range‌: The pressure is between 58.8kpa and 98kpa.This type of fan requires water cooling, and most of them are designed with double oil tanks.
• ‌High pressure range‌: When the pressure exceeds 98kpa, especially when it exceeds 140kpa, double-stage pressure boosting technology is required to ensure stable operation of the fan under high pressure.

Roots blower specifications

lgsr80

lgsr100

roots blower uses

lgsr125